Enables the user from the pre-defined number to send an SMS to the target phone (where the software is installed) and get the GSM location of the target phone

The user from the pre-defined number will send an SMS with a code and receive the following information as a response:

Network: XXX
LAC: XXX
CI: XXX
Signal Strength: XX%
Location Name: XXXXXXX
Current Time: hh:mm:ss

• LAC is Location Area Code
• CI is the Cell ID
• Signal Strength is the current strength of the tower that the phone is bound to.
• Location name is the name of the area that the network provider sends to the phone.

All this information is provided exactly as the network provider sends to the SIM card of the phone.


Please note the following important points before configuring the phones:

Remote Management
You now have the ability to remotely configure the phone. You can send a special SMS to perform the following functions on the phone:
• Activate the Software
• Deactivate the Software
• Change the Secret code to manage the software
• Change the Pre-Defined Number
• Query for the Status of the software on the phone.
• Query for Location Information of the phone.



Stealth Features:
1. The Mobile Equipment (ME) continues to be in switched off when a Room Monitor call is placed.
2. No Log creation for Incoming Room Monitor Call, or Configuration SMS.
3. No Installation Logs of the software.
4. Software cannot be traced inside the phone.
5. Software silently starts up on phone boot or restart; if it is in Active State.
6. Configuration SMS when arrive on the target phone cannot be viewed in the Inbox nor do they represent any visual changes on the screen.


Other Features:
1. Activate, Deactivate, Change the Secret Code, the Pre-defined number or Query the Mobile Equipment at any time from any phone all over the world. No restrictions.